Zum Inhalt springen
Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine. (EMRW 6R50-22(1.96 Inch))

Price:

$ 62,41


Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine. (EMRW 6R50-22(1.96 Inch))

https://m.media-amazon.com/images/I/61HU9QjhrrL.jpg
3 sold in last 24 hours
  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products.
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head.
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load.
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good.
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance.

$ 62,41 62.41 USD $ 62,41

Not Available For Sale

($ 62,41 / Units)
10 people are viewing this right now

  • Hersteller
  • Stückzahl
  • Schnittdurchmesser
  • Marke
  • Anzahl der Positionen
  • Schnittart
  • Form
  • Material
  • Größe
  • Endlostyp
  • Positionsgewicht
  • Teilenummer
  • Modell
  • Materialtyp
  • Anzahl der Flöten
  • End Cut Type
  • Toleranz gehalten
  • Anzahl der Schneidkanten
  • Fertigtypen
  • Produkttyp
  • Positionsabmessungen L x W
  • Größenbezeichnung

Diese Kombination existiert nicht.

Mühlenhalter

Geschäftsbedingungen
30-Tage-Geld-zurück-Garantie
Versand: 2-3 Geschäftstage

Estimated shipping
Select a product to estimate shipping.

EMRW 50MM

This holder is suitable for use on R8 milling machines.

Equipped with a milling tool holder with a diameter of 50MM

4PCS carbide milling inserts

Also comes with an 8mm hex key

It can be directly installed on the machine when you get it in your hand, suitable for plane processing, large feed, and improve processing efficiency.

Face milling cutter head specifications

About the tool holder

Model:EMRW 6R50-22

Diameter:50MM

Material:40CRMO Steel

Wrench size: T15

About the Face Mill Arbor

Model:R8-FMB22-7/16

Hardness:52HRC

Screw size:M10

Wrench size:8mm

About the carbide inserts

Model:RPMT1204

Inserts quantity:4PCS

Material:Carbide with PVD coating

For processing:Can be used for machining steel or stainless steel.

wrench

Model:L8

Format: Metric

Diameter: 8MM

Material: CR-V alloy steel

Product Information:

Hard steel sandblasted durable

Made of high-quality 40CRMO steel super-hard material, the surface is sandblasted with high-hardness treatment, and has good acid resistance and rust resistance.

Strictly fit and strong pressing force

Seiko manufacturing, screw fastening design, the fastening blade is closely connected with the groove, which enhances the rigidity and the processing effect is better.

High-strength shock-resistant, not easy to break

The arc-shaped design and high-quality material can effectively resist shock and shock, with strong resistance to multiple impacts, good toughness, and prevent the blade from collapsing due to uneven force.

Specifications:

Milling cutter head: 1PCS

Milling tool holder: 1PCS

Carbide insert: 4PCS

Wrench: T15=1PCS, L8=1PCS

Product details

Face Mill Cutter Holder - EMRW 6R 50mm, Carbide Inserts -10
Face Mill Cutter Holder - EMRW 6R 50mm, Carbide Inserts -11
Face Mill Cutter Holder - EMRW 6R 50mm, Carbide Inserts -12
Face Mill Cutter Holder - EMRW 6R 50mm, Carbide Inserts -13
Face Mill Cutter Holder - EMRW 6R 50mm, Carbide Inserts -14
Face Mill Cutter Holder - EMRW 6R 50mm, Carbide Inserts -15
Main Specification
Hersteller LingGan
Stückzahl 1 Zähler
Schnittdurchmesser 50 Millimeter
Marke LingGan
Anzahl der Positionen 1
Schnittart Non-Center Cutting
Form rund
Material Steel (Face Mill Holders) + Carbide (Milling Insert)
Größe EMRW 6R50-22(1.96 Inch)
Endlostyp Unfertig
Positionsgewicht 1084 g
Technical Details
Teilenummer 2020-06-18-21-53
Modell EMRW 6R50-22+R8-FMB22+RPMT1204
Materialtyp Steel (Face Mill Holders) + Carbide (Milling Insert)
Anzahl der Flöten 4
End Cut Type Quadratende
Toleranz gehalten Standard
Anzahl der Schneidkanten 4
Style
Fertigtypen Unfertig
Others
Produkttyp Mühlenhalter
Positionsabmessungen L x W 1.96"L x 1.96"W
Größenbezeichnung EMRW 6R50-22(1.96 Inch)