Zum Inhalt springen
The Hillman Group 44826 1/4-20 x 6-Inch Threaded Rod, 8-Pack

Price:

$ 19,55


The Hillman Group 44826 1/4-20 x 6-Inch Threaded Rod, 8-Pack

https://m.media-amazon.com/images/I/61m4ru8lbjL.jpg
11 sold in last 24 hours
  • THREADED ALONG ITS WHOLE LENGTH: This rod is threaded continuously from end to end, so a nut, coupler, or hanger can be fastened anywhere along it, making it ideal wherever tension loads are expected and a custom-length fastener is needed.
  • CUT TO SIZE, TAKES NUTS AND COUPLERS: Run nuts, washers, and couplers on at any point, and cut the rod to length with a hacksaw for a custom fit; this piece measures 1/4-20 x 6 inch in a coarse thread that pairs with standard coarse hardware.
  • ZINC-PLATED STEEL: Made from steel with a zinc plating, the rod offers moderate protection against rust and corrosion, so it holds its strength and threads cleanly for indoor use and covered outdoor jobs over the long term.
  • PLUMBING, HVAC, AND HANGING: Ideal for hanging, connecting, clamping, and supporting in plumbing, heating, and air-conditioning work, and for mechanical, agricultural, and general fabrication wherever a threaded tension member is needed.
  • TRUSTED HILLMAN QUALITY: Hillman supplies dependable threaded rod, studs, and fasteners that tradespeople and homeowners rely on every day. Keep an assortment on hand for hanging, clamping, and repair jobs around the home, shop, and site.

$ 19,55 19.55 USD $ 19,55

Not Available For Sale

($ 19,55 / Units)
9 people are viewing this right now

  • Hersteller
  • Stückzahl
  • Äußeres Ziel
  • Fadenabdeckung
  • Befestigungsmaterial
  • Außendurchmesser
  • Marke
  • UPC
  • Typ des Verbindungselements
  • Positionsdurchmesser
  • Anzahl der Stücke
  • Fadengröße
  • Material
  • Farbe
  • Gewindetyp
  • Global Trade Identification Number
  • Positionsgewicht
  • Set Name
  • Teilenummer
  • Modell
  • Materialtyp
  • Anzahl der Positionen
  • Thread Style
  • Positionshärte
  • Fertigtypen
  • Positionsmaße
  • Produkttyp
  • Item Highlight
  • Größenbezeichnung
  • Hardwarematerial
  • Zustandsart

Diese Kombination existiert nicht.

Fully Threaded Rods & Studs

Geschäftsbedingungen
30-Tage-Geld-zurück-Garantie
Versand: 2-3 Geschäftstage

Estimated shipping
Select a product to estimate shipping.

Hillman Threaded Rod is ideal for use wherever, and whenever, tension loads are expected and a fastener needs to be made to a custom length. The rod is threaded continuously along its entire length, so nuts, washers, couplers, and hangers can be fastened anywhere on it, which makes it one of the most versatile fasteners to keep on hand for building, hanging, and repair work. Because the thread runs the full length, the rod adapts to the job: run hardware on at any point, and cut the rod to the exact length you need with a hacksaw or rotary tool. This piece measures 1/4-20 x 6 inch in a coarse thread, and it pairs with standard coarse nuts, washers, and couplers for hanging, connecting, clamping, and support. Made from steel with a zinc plating, the rod offers moderate protection against rust and corrosion. That keeps its strength and lets its threads run cleanly for indoor use and covered outdoor jobs over the long term, so a suspended or clamped assembly stays secure rather than seizing or weakening where the load is carried. Use threaded rod for hanging, connecting, clamping, and supporting in plumbing, heating, and air-conditioning systems, and for mechanical, agricultural, and general fabrication projects. It is useful for a myriad of jobs from hanging light fixtures and pipe to building jigs and U-bolt assemblies. Keeping a few sizes on hand means the right rod is always ready.

Threaded Rods, also known as studs, are rods with continuous threading on both ends and no head or fashioned tip. They can be used as an anchor bolt, clamp, hanger or U-bolt. The threaded rod may extend along the complete length of the rod.

Hillman Solutions is a leading North American provider of hardware products, including home improvement products, protective and job site gear solutions including gloves and storage, and robotic technologies encompassing key duplication and accessories, engraving and knife sharpening. Hillman designs innovative products and merchandising solutions for complex categories. Founded in 1964 in Cincinnati, Ohio, Hillman believes that the building never stops.

Main Specification
Hersteller Die Hillman Group
Stückzahl 1 Zähler
Äußeres Ziel Stahl
Fadenabdeckung Vollgewinde
Befestigungsmaterial Legierungsstahl
Außendurchmesser 0,25 Zoll
Marke Hillman
UPC 008236781977
Typ des Verbindungselements Vollgewinde
Positionsdurchmesser 0,25 Zoll
Anzahl der Stücke 8
Fadengröße 1/4"-20
Material Stahl
Farbe Silber
Gewindetyp Un
Global Trade Identification Number 00008236781977
Positionsgewicht 0,27 g
Product information
Set Name Hillman 1/4-20 x 6" Threaded Rod Set (8-Pack)
Technical Details
Teilenummer 44826
Modell 44826
Materialtyp Stahl
Anzahl der Positionen 1
Thread Style Vollgewinde
Positionshärte B70
Style
Fertigtypen Stahl
Measurements
Positionsmaße 6 x 0.25 x 0.25 inches
Others
Item Highlight HVAC or Sanitäranlagen or rostbeständig or Halterungen or Runs continuously end to end or cut to any size or takes nuts and couplers or clamping
Produkttyp Fully Threaded Rods & Studs
Größenbezeichnung 5 Pack
Hardwarematerial Legierungsstahl
Zustandsart Klasse B7