3M Scotch-Brite Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, T27, 4-1/2 in x 5/8"-11, Silicon Carbide Cuts Aggressively and Leaves a Fine Finish, Resists Loading, Purple
8 sold in last 24 hours
- RECOMMENDED APPLICATIONS: Cleaning, finishing, surface preparation, rust removal, light scale removal and coating removal
- WORKS EFFICIENTLY AND FAST: Quickly removes rust, paint, light mill scale and coatings from metal
- REENGINEERED FIBER: High strength fiber resists chunking and performs well on edges
- CONFORMABLE: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
- SHARP ABRASIVE GRAIN: Silicon carbide mineral cuts aggressively and leaves a fine finish
- CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
- PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark
- For industrial/occupational use only. Not for consumer sale or use
Tags |
Estimated shipping
Select a product to estimate shipping.Scotch-Brite Clean and Strip XT Pro is a stripping disc that uses silicon carbide abrasive mineral incorporated into a purple nonwoven nylon web. It quickly removes paint, rust, mill scale, adhesives and other coatings from metal surfaces without damaging the base material. The fibers of this metal stripping disc are highly conformable without compromising strength, meaning improved effectiveness on work piece edges. Here’s how it works: the silicon carbide mineral is embedded into the nylon fibers that gradually break down over time to reveal new fibers and fresh mineral – ensuring a consistent cut over the life of the product. The XT Pro disc is the next generation of the classic clean and strip rust and paint stripping disc. Compared to previous generations, this Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a higher speed rating and longer life. That all adds up to a stripping disc you can spin onto your right angle grinder with confidence.
Important information
Legal Disclaimer
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
3M History
Here, our history inspires your future.
More than a century ago, 3M started as a small-scale mining venture in Northern Minnesota, then named Minnesota Mining and Manufacturing Company. Now a global powerhouse, our products improve the daily lives of people around the world.
But our success and longevity were not apparent from the start. We tried. We failed. We tried something new. Repeat cycle. Innovation and perseverance drove our founders, and it continues to drive 3Mers today.
Find your way to our products
Abrasives
Adhesives & Tapes
Personal Protective Equipment
Home Improvement
Films
Health Care
Automotive
Office & School Supplies
Product details
| Main Specification | |
|---|---|
| Utilisations recommandées pour le produit | Découpe or Rust Removal or Paint Removal |
| Fabricant | 3M |
| Numéro d'unité | 1 Compte |
| Vitesse maximale de rotation | 13300 rpm |
| Matériel compatible | Métal |
| Type de grit | Extra Coarse |
| Marque | Cubitron |
| Matériel de traitement | Silicon Carbide |
| UPC | 638060299005 |
| Nombre d'articles | 1 |
| Composantes incluses | Surface Conditioning Discs (1.0) |
| Diamètre de l'article | 4.5 Inches |
| Dimensions du produit | 4.5"L x 0.63"W |
| Appareils compatibles | Angle Grinder |
| Épaisseur du point | 0.63 Inches |
| Numéro d'identification du commerce mondial | 00638060299005 |
| Product information | |
| Type de construction | Coated |
| Nombre d ' emballages | 1 |
| Technical Details | |
| Numéro de pièce | 29900 |
| Modèle | 29900 |
| Type de matériau | Silicon Carbide |
| Grit Number | 60 |
| Measurements | |
| Dimensions de l'article | 4.5 x 0.63 x 0.1 inches |
| Others | |
| Type de produit | Quick Change Discs |
| Dimensions de l'article L x W | 4.5"L x 0.63"W |
| Type de matériau de traitement | Silicon Carbide |
| Industry Standard Identifier | ANSI/ISO 12912 |